How to Fix HDMI Audio device not detected in Windows 10

HDMI is a standard that permits sending uncompressed audio and video information from one device to another. It implies there is no compromise in the quality. You improve sound and clear video. However, perhaps the most widely recognized issues noticed with HDMI is that while the video shows up on the monitor or television, the audio disappears. That issue happens in any event when everything is connected, and all you expected is a fitting n-play arrangement. This post will propose how you can resolve the issue when you get a mistake No HDMI Audio device is detected.

Before we talk about the advanced degree of troubleshooting, we should get a couple of things straight. To begin with, Make sure your HDMI link isn’t to blame. You can attempt it with another PC or another TV. Second, sort out if the two sides of the ports are HDMI. If you are using VGA to HDMI or DVI to HDMI, they don’t uphold audio. Third, the audio isn’t at quiet either from the TV or the monitor.

HDMI Audio device not showing in Windows 10

Finished with the essential troubleshooting, we should investigate these to determine the audio issue. Some of them will require admin consent, so cause you to approach that account.

  • Reconnect the TV or monitor
  • Change TV or Monitor sound settings
  • Run the Audio Troubleshooter
  • Set the HDMI device to default
  • Restart Windows Audio services
  • Update the sound card
  • Empower Audio Controllers and reinstall Audio Controllers
  • Check HDMI Playback settings in Sound Panel.

A portion of the settings for TV and Monitor may differ depending on the brand

1] Reconnect the TV or Monitor

Now and again, it simply happens, and If you plug it out and plug it back in, it starts working. Try to attempt a different port as some TV and monitor accompany various ports. That will likewise assist you with understanding if you have a port issue.

2] Adjust TV or Monitor sound settings

Televisions and Monitors accompany worked in audio control. Regardless of whether you are playing on full volume, yet its volume is quiet or practically 10%, you may not hear the audio and accept that it’s missing.

The television controller should help you check with this issue. With regards to monitors, you need to use the buttons accessible at the bottom or side of the monitor and change the volume settings.

Keen TVs are astonishing with Android TV, and you should go to External Inputs > HDMI signal organization and select HDMI 1.4.

3] Run the Audio Troubleshooter.

Run the Audio Troubleshooter

Now that we are finished with outer connection troubleshooting how about we begin with the product-based troubleshooting.

Go to Windows 10 Settings, and explore to Update and security > Troubleshoot > Additional investigators > Playing Audio. Select it, and run the audio investigator.

4] Set the HDMI device to default

Set the HDMI device to default

It is imperative to set the default sound device as yield. You may have a monitor with an outer speaker, however, the audio yield is set to some other device.

In the system tray, find the audio symbol, and click on it. It will list all the connected audio devices. Select the name of the monitor. Play any audio, and you ought to have the option to hear it out.

5] Restart Windows Audio services

Restart Windows Audio services

Like any remaining parts, Audio is additionally accessible as an audio administration. If the administration continues to stop or has stopped, you won’t tune in to the audio.

Type Services.msc in the Run prompt (Win +R), and press the Enter key. In the administration’s list, find Windows Audio administration. Right-click on it, and decide to restart. If the administration is stopped, you can decide to start.

Additionally, try to do likewise for Windows Audio Endpoint Builder as the Windows Audio administration relies upon it.

6] Update the sound card

The following recommendation is to update the audio driver, recorded as Intel Display Audio or AMD Display Audio.

Go to Device Manager ( Win + X, trailed by M), and afterward find and extend the Sound, video, and game regulators area. Right-click on the Intel Display Audio or AMD Display Audio, and decide to update the driver.

You can likewise check the OEM site and update the driver by downloading the file. Ensure it is for the adaptation of Windows installed on the PC.

7] Enable Audio Controllers and Reinstall the device

Enable Audio Controllers and Reinstall the device

HD Audio offers a multi-streaming element that permits more audio signs to be shipped off different audio devices using different media. Intel offers a regulator that deals with this, and under any circumstances, there is an issue with it, then you need to check if it’s enabled.

Also see: Unblocked Adobe Flash Player [Chrome, Firefox, Edge]

Open Device Manager, and click on View, and click on Show concealed devices. Then, explore to System Devices > High Definition Audio Controller. Ensure it is empowered. If it is now empowered, then handicap, and empower it. You can likewise decide to uninstall it and afterward reinstall it.

8] Check HDMI Playback settings in Sound Panel

Check HDMI Playback settings in Sound Panel

Open the Sound control board, and find the speaker in the Playback rundown of devices. If you cannot sort it out, right-click on it and select properties. If you see HDMI Digital or anything comparative, then that is your speaker.

You would then be able to right-click on it to test the speaker, cripple and empower it, and set it as the default specialized device.

Follow these steps to set the device as Default Device

  1. Open Control Panel> Click on Hardware and Sound
  2. Click open Sound
  3. Under the Playback tab, right-click in the clear space
  4. Select both ‘Show Disabled Devices‘ and “Show Disconnected Devices“.
  5. Now right-click on HDMI Output.
  6. Click on Properties
  7. Under the General tab click on Device Usage and select Use this Device:(Enable).
  8. Click Apply. Click OK.
  9. Subsequent to doing this, under the Playback tab, click on HDMI Output and select Set as Default.
  10. Click Apply > OK and exit.

Leave a Comment