Fix 2101 Detection error

How to Fix 2101: Detection error on Storage Device on Windows 10

If when you turn on your Windows 10 device and you see on a dark foundation the message 2101: Detection error on Storage Device, then this post is proposed to help you. In this post, we will identify the likely causes of the error, just as offer the most appropriate solutions you can attempt to effectively resolve this issue.

Fix 2101 Detection error

At the point when you experience this issue. you’ll get the accompanying message;

2101: Detection error on Storage Device

Press Esc to continue.

Upon squeezing the Esc key as trained, the booting succession basically restarts before getting stuck at a similar error screen.

Remember that at times, the principal line of the message will specify SSD or HDD all things considered and that the number demonstrated may change. Nevertheless, the solutions introduced in this post applies.


The most famous situation that may wind up causing this error is transitory information stored by your laptop battery or CMOS battery. This ordinarily happens after a sudden PC crash.

The issue can likewise happen because of an awful connection between the hard drive and the connector opening on your motherboard.

This error message may likewise be the aftereffect of incongruence between the Chipset Driver and the Intel RST driver.

Also see: Enable or Disable Delete Confirmation Dialog in Windows 10

The SSD or HDD is being stuck in Hibernation mode. This regularly happens if there’s a force source or another factor contributed to the total loss of intensity. At the point when this happens, there’s a possibility that your storage device will be not able to recuperate automatically.

Fix 2101: Detection error on Storage Device

If you’re confronted with this issue, you can attempt our suggested solutions beneath in no specific request and check whether that assists with settling the issue.

  • Remove and reinsert laptop battery
  • Reset CMOS battery
  • Update SSD/HDD driver
  • Make Sure SSD/HDD solidly connected properly
  • Re-seat the drive
  • Manually wake drive from hibernation
  • Enable UEFI mode
  • Update BIOS

We should investigate the description of the cycle included concerning every one of the recorded solutions.

1] Remove and reinsert laptop battery

Before you continue to eliminate the laptop battery, if your laptop is connected to an electrical plug, unplug it and disconnect the force link.

This strategy to eliminate laptop battery changes across different producers – it ordinarily includes sliding the lock switch on the battery sound to the contrary side and holding in that position until the battery is delivered.

Sit tight for an entire moment after you take out the battery, then add it back in and restart your laptop to check whether the issue has been settled. If not, attempt the following solution.

2] Reset CMOS battery

You may require the administrations of an equipment specialist for this.

Do the accompanying:

  • Turn-Off your PC and unplug it from the force sources. As an additional measure, divert off the force from your PSU switch on the back.
  • After the force is totally cut, outfit yourself with a static wristband (if conceivable) and eliminate the slide cover.

Note: Equipping yourself with a static wristband is favored to ground yourself to the edge and maintain a strategic distance from disagreeable situations where friction based electricity releases wind up delivering harm to your PC components.

  • Once you see your whole motherboard, identify the CMOS battery – Usually, it’s situated close to your SATA/ATI openings. At the point when you see it, use your fingernail or a non-conductive sharp item to eliminate it from its opening.
  • After you eliminate it, hang tight for an entire moment before embeddings it back into the opening.
  • Next, set the cover back on, connect the force link back to the electrical plug, and flick the PSU power switch back ON before booting your PC once more.

If the error perseveres, attempt the following solution.

3] Update SSD/HDD driver

To apply this fix, you need to eliminate the OS SSD/HDD and connect it to a solid PC as secondary storage (don’t boot from it). Now relying upon your drive maker, you’ll need to download the firmware utility, install and dispatch the utility and use that to update the drive drivers.

Once done, disconnect the drive and reconnect it on the first framework. Boot your PC and check whether 2101: Detection error on Storage Device appears once more. If in this way, attempt the following solution.

4] Ensure SSD/HDD is immovably connected to MOBO

You may require the administrations of an equipment specialist for this.

Do the accompanying:

  • Close down and Unplug your PC from the electrical plug.
  • Open the side or back front of your PC and find the tricky HDD. If you have two HDDs, ensure you’re focusing on the one that is storing your working framework.
  • Next, eliminate the information and the force connectors from both the HDD and motherboard ports.
  • Once the HDD is effectively disconnected, clean the connection ports on the two sides and change the elaborate links if you have saved them.
  • After you reconnect the HDD with the appropriate links and you guarantee that the connection is strong, returned the situation, connect your PC to the electrical plug and check whether the issue is now settled.

Now, check if the issue is settled. If not, continue with the following solution.

5] Re-seat the drive

Eliminate the two console screws and eliminate the console and RE-SEAT the miniSata drive. There is one screw holding the board down. Eliminate it, re-embed it in. Screw everything back up.

Contingent upon your device, you will require the Hardware Maintenance Manual for your device. You may likewise require the administrations of an equipment expert for this.

6] Manually wake drive from hibernation

This solution expects you to get to your BIOS and change the SATA integration to similarity mode – this will effectively wake up the drive back up.

After you do this and your drive exits hibernation, you’ll need to return to your BIOS and change the utilization of SATA back to AHCI.

Do the accompanying:

  • Boot into BIOS on your PC.
  • Once you are inside your BIOS settings, explore to Devices and change the SATA Controller Mode Option to Compatible.
    • Note: With specific configurations, you may discover this setting option under the Advanced tab.
  • Spare your present BIOS configuration.
  • Reboot your PC.

If the error doesn’t reappear, boot into BIOS again and change the default IDE Configuration menu back to AHCI – Typically from the IDE Controller or SATA Configuration menu. Once done, reboot your PC.

7] Enable UEFI mode

This solution expects you to switch the default boot mode from Legacy First to UEFI first mode. This option changes across different models, yet risks are you’ll see it under Startup options in the principle BIOS menu.

8] Update BIOS

This solution requires you to refresh the BIOS and firmware on your framework.

Using tools from OEMs is the most straightforward approach to do as such. All OEM producers have utilities that assist you with refreshing, BIOS, firmware, and drivers. Quest for yours and download it from the official webpage only. This is the most secure approach to update the BIOS.

  • If you own a Dell laptop you can go to, or you could use Dell Update Utility.
  • ASUS users can download the MyASUS BIOS update utility from the ASUS uphold website.
  • ACER users can go here. Enter your Serial Number/SNID or quest for your item by Model, select BIOS/Firmware, and click the Download link for the file you need to download.
  • Lenovo users can use the Lenovo System Update Tool.
  • HP users can use the packaged HP Support Assistant.

Once you complete the manual update of the BIOS/firmware on your framework, the storage drive error should be fixed.

Leave a Comment

Your email address will not be published. Required fields are marked *