Home How To Fix SSD is in BIOS, but Windows 10 won’t boot from it

Fix SSD is in BIOS, but Windows 10 won’t boot from it

by Mohsin Raza
Boot screen

Solid-state drives (SSD) are a quicker move up to the traditional hard disk drives (HDD). SSDs beat HDDs, in speed as well as in execution and durability. This post isn’t about how extraordinary SSDs are and why you should redesign them. It’s about an issue users have encountered while booting from your SSD.

On starting up your PC, it will inquire as to whether you have numerous drives present. The issue here is that in spite of the fact that the BIOS sees the connected SSD, it refuses to boot from it.

Fix SSD is in BIOS, but Windows 10 won’t boot from it

If your SSD is discovered, identified, and perceived by BIOS but Windows 10 doesn’t boot, this is what you have to do to fix the issue:

  • Enable Legacy boot on the BIOS.
  • Reset the BIOS settings.

Do peruse further as we breakdown the above tasks into simple-to-follow steps.

1] Enable Legacy boot on the BIOS

Legacy Boot

Force off your PC and walk out on. Promptly it starts to boot, press F2 more than once until the BIOS Setup Utility screen appears. Here, you can explore neighboring tabs using the left and right directional buttons.

Also see: Windows 10 Insider Preview Build 20257 – Phone Android App Support

  • Go to the Boot tab using the directional button and look down to the UEFI/BIOS Boot Mode choice.
  • Hit the ENTER key, and you’ll be approached to make a choice.
  • Move the cursor to the Legacy boot mode and press ENTER to choose it.
  • Now, exit the BIOS menu and let your machine continue the Windows startup using Legacy Boot.

NOTE: The above cycle may differ marginally in the motherboards of different producers.

2] Reset the BIOS settings

Boot screen

There are a few different ways to reset the BIOS, but the most secure and most non-specialized method is by doing it from the UEFI or BIOS menu. To begin with, restart your PC.

  • Hold down the SHIFT key while the PC boots, and you’ll show up at the Advanced troubleshooting alternatives screen. Go to Troubleshoot > Advanced Options and select UEFI Firmware Settings.
  • Finally, continue restarting your machine. On startup, you’ll be taken to an arrangement menu. Here, search for the reset button. The button doesn’t really need to be named reset; the maker can call it anything.
  • Check settings territories, for example, setup, settings, alternatives, and so on On the setting page, hit the button to stack the default BIOS options and click on Yes when requested to authenticate the section.
  • You would now be able to leave the Advanced Settings and booting choices territory. On finishing the cycle, your BIOS settings would re-visitation their original qualities and would now be able to boot from the SSD.

You may also like

Leave a Comment