Home How To Wi-Fi icon on the toolbar not showing the list of available networks

Wi-Fi icon on the toolbar not showing the list of available networks

by Mohsin Raza
disable-wireless-adapter-driver

The quickest method to find and connect to networks in your general vicinity is by clicking on the organization icon on the taskbar. Ordinarily, you’ll now observe a list of available networks, and you only need to choose an organization to connect to it.

However, a few users can encounter an issue where clicking on the organization icon shows nothing. One could accept that there’s no available organization, yet if you’re certain that there are available networks to connect to, then you have an issue on your hands. This implies that your PC is done discovering available networks. If you’re experiencing this issue, perused this post as far as possible to learn approaches to determine it for good.

Wi-Fi icon on toolbar not showing a list of available networks.

An assortment of factors can cause your PC to stop discovering available networks. Join me in this section as we investigate this frustrating issue. Here are the fixes we’ll utilize:

Having set out these solutions, how about we dig into the inside and out aides for performing them.

1] Re-install the wireless connector driver

disable-wireless-adapter-driver

Open the Run exchange box using the Windows key + R combination and run the devmgmt.msc order. This opens up Device Manager.

Here, extend the Network connectors section and right-click on your wireless connector driver. Select the Disable device option from the context menu.

The list will now invigorate, and the Wi-Fi icon may disappear from your taskbar totally, yet don’t be frightened.

Right-click on the wireless connector driver again and hit Enable device from the context menu. After this, confirm that the available networks now show up when you click the organization icon on the taskbar.

2] Turn on network discovery

turn-on-network-discovery

Organization disclosure allows you to see and speak with other devices in your organization. Along these lines, if you hit the Network icon and don’t perceive any devices, you may simply need to turn on network disclosure. Here’s how to do it:

Open Windows Settings using the Windows key + I combination. In Settings, go to Network and Internet > Wi-Fi > Change Advanced Sharing Option.

Extend the Private organization section and select Turn on network disclosure under Network revelation.

Extend the Guest or Public organization section and pick the Turn on network disclosure option in Network revelation.

Finally, hit the Save changes button beneath.

3] Delete obsolete VPN passages from the Windows vault

If you’ve connected through a virtual private organization (VPN) before or right now, you might need to eliminate its entrances from your framework vault. These passages may effectively obstruct the disclosure of available networks.

Firstly, working on the Windows library can break your framework. Therefore, I suggest that you back up your library prior to proceeding with this fix.

Press the Windows key and type cmd. Right-click on Command Prompt from the suggestions and click on Run as administrator.

Input the following order in the Command Prompt window and press ENTER:

netcfg - n

You will now observe every one of your drivers, benefits, and networking protocols listed. Post for DNI_DNE on this list, as it belongs to an old Cisco VPN customer. If you find DNI_DNE, type the underneath order and hit ENTER to run it.

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f

Next, run the following order:

netcfg -v -u dni_dne

Finally, close the Command Prompt window. Now, if an obsolete VPN were the cause of the organization issue, it’d be fixed.

4] Configure Network Location Awareness and Network List Services

network-list-service-manual-startup

The Network List Service (netprofm) is the administration responsible for discovering networks that you have connected to already. This administration additionally recovers the properties of these networks and updates applicable projects with info about these networks.

Together with the Network Location Awareness administration, the Network List Service lets your PC framework show you the status of connections in the taskbar. To function appropriately, you need to empower both framework administrations and set their startup types.

Open the Run discourse box and search for services.msc.

Find the Network List Service and right-click on it, and pick the Properties option.

Click on the Startup type dropdown menu and select Manual. Guarantee that the Service status says Running. If not, click on the Start button.

Hit the Apply and OK buttons to spare your settings.

Find the Network Location Awareness administration, right-click on it, and click on Properties. In the startup type dropdown menu, change it to Automatic. If the administration isn’t running, hit the Start button.

Click on Apply and OK.

5] Unblock obstructed SSIDs with the Netsh order

SSID represents the Service Set Identifier. An SSID is essentially an organization’s name. We composed a definite article on how to hinder your PC from connecting to SSIDs. If you block an organization, it won’t show up when you click the Wi-Fi icon.

In this fix, we’ll open all the obstructed networks to ensure that this isn’t the root of the issue. This solution is most useful when only a few networks appear when you click the organization icon, and others don’t.

First, strike the Windows key and quest for cmd. Right-click on Command Prompt and select Run as administrator. In Command Prompt, type the following order and press ENTER:

netsh wlan delete filter permission=denyall networktype=infrastructure

Following this, near the Command Prompt, and look if you actually don’t find networks by clicking on the Wi-Fi icon.

You may also like

Leave a Comment