Home How To How to Fix Hard Drive Not installed problem on Windows 10

How to Fix Hard Drive Not installed problem on Windows 10

by Mohsin Raza
Fix Hard Drive Not installed problem

If you’re experiencing the blunder message Hard Drive – Not installed on your Windows 10 PC, then this post is planned to support you. In this post, we will identify the potential causes, just as give the most appropriate solutions you can attempt to assist you with remediating this issue.

According to user reports, you’re destined to experience this blunder on an HP, Lenovo, or a Dell PC.

There are a few reasons why your Dell PC reports no hard drive installed, recognized or missing working framework mistake on startup:

  • Bad BIOS setting.
  • A free link.
  • A tainted hard drive library.
  • A bad Windows installation.
  • A boot sector infection.
  • A wrecked hard drive.
  • Hard Drive – Not installed

If you’re confronted with this Hard Drive Not installed problem on Windows 10, attempt this first:

Unplug the framework and eliminate the base spread. Disconnect the battery and hard drive. Then hold the force button for 30 sec. Reconnect both and power up – verify whether the drive is perceived.

If it’s not, and the framework is under guarantee – call Dell for a drive substitution.

However, if you wish to do a touch of investigating yourself, you can attempt our suggested solutions beneath in no specific request and check whether that assists with settling the issue.

  • Continuously press the F1 key
  • Check BIOS setting
  • Check hard drive link
  • Perform PC hard reset
  • Test the Hard Drive for physical harm
  • Play out a Windows Repair Install

We should investigate the description of the cycle included concerning every one of the recorded solutions.

1] Continuously press the F1 key

If your Dell PC shows the Hard Drive – Not installed blunder, you can press F1 to continue. It is a BIOS mistake message. Squeezing F1 is a contingency strategy that can work around a mistake, and the PC may stack into Windows effectively subsequent to squeezing F1.

2] Check BIOS setting

Profiles handle the fundamental arrangement and boot measure for the PC and sets it up to stack the working framework. Hard drives are typically connected to onboard a SATA or IDE port. If the port that the hard drive is connected is debilitated, the hard drive won’t be distinguished by the PC and you will get Hard Drive – Not installed blunder message. For this situation, you have to check or reset the BIOS arrangement and furthermore guarantee that the hard drive is on top of the rundown in the boot need.

3] Check hard drive link

You may experience this blunder if the PC isn’t genuinely connected to the hard drive. So you can check the hard drive link to guarantee whether it has a free link connection or the SATA link and force link may have exhausted. If it is, you can reconnect the links from both the hard drive and the MOBO, or supplant the link with another one.

How To Remove Extra CD Drive In Windows 10

In the latest update in Windows 10 (late August) there is an extra CD Driver letter also appeared. The Extra CD drive that in Windows 10 is related to the…

4] Perform PC hard reset

A hard or constrained reset deletes all information in the PC memory and might restore functionality. Resetting your PC powers the framework to clear and restore the product connections between the BIOS and the hardware.

Do the accompanying:

  1. Turn off the PC.
  2. Remove the PC from any port replicator or docking station.
  3. Disconnect all outside devices from your PC, unplug the AC connector from the PC.
  4. Remove the battery from the battery compartment.
  5. Press and hold down the Power button for around 15 seconds to empty any leftover electrical charge out of the capacitors that ensure the memory.
  6. Supplement the battery, and fitting the AC connector once again into the PC, yet don’t connect any of the fringe devices, for example, USB storage devices, outer presentations, printers, and so on.
  7. Turn on the PC.

If a start menu opens, select Start Windows Normally with bolt keys and hit Enter.

5] Test the Hard Drive for physical harm

Eliminate the hard drive from the PC and connect it to another PC to see whether it despite everything works. if it doesn’t, you ought to supplant the hard drive with another one. If it does, you can test the hard drive to check whether it has terrible sectors.

6] Perform a Windows Repair Install

A terrible Windows installation may cause blunders and keep Windows from stacking. Consequently, the Dell PC may show this blunder while booting. For this situation, you can have a go at running a fixed installation to fix it. If Windows sees the hard drive when running a fixed install, the drive is presumably not broken.

If the fixed install doesn’t work, the drive might be tainted with a boot sector infection, which you have to fix by Formatting the hard drive.

You may also like

Leave a Comment