Home How To How to Fix Windows Update Error 8024A000

How to Fix Windows Update Error 8024A000

by Mohsin Raza
How to Fix Windows Update Error 8024A000

If you see a Windows Update error code 8024A000 when you try to run Windows Update, this guide can help you out of this mess. When you run Windows Update, you may see the following message:

Error (s) found: Windows Update code 8024A000 encountered a problem

The technical error message is WU_E_AU_NOSERVICE. This means that a service related to Windows Update may have malfunctioned.

Windows update error code 8024A000

To fix Windows Update error code 8024A000, follow these suggestions:

Before you begin, first create a system restore point. If you ever change your mind, then it will help you reverse the unwanted changes.

I suggest that you test them sequentially as you do here. Let’s see them in detail.

1] Run the Windows Update troubleshooter

The Windows Update troubleshooter is an integrated tool that can effectively resolve the common problem associated with Windows Update. Check the status of process-related services, and restart the system if necessary.

To run it, go to Windows Settings (Win + I)> Updates and Security> Troubleshooting.

Now go to the right pane, scroll down a bit, and run the Windows Update troubleshooter.

Once the process is complete, restart your device and check if it fixes the problem. Otherwise, go to the next potential solution.

2] Restart Windows Update Services

Sometimes this annoying error can also occur due to Windows Update service which seems to be blocked at a particular point.

According to the report of some users, they solved the problem by restarting all the services used by the Windows Update component.

To restart Windows Update Services, open an elevated command prompt. If the UAC message appears on the screen, click the Yes button to give your approval.

In the elevated command prompt window, type the following commands and press Enter after each:

net stop wuauserv
net stop bits
net stop cryptsvc

This will stop Windows Update services. To restart these services, type the following command and press enter after each of them.

net start wuauserv
net start bits
net start cryptsvc
exit


After running the above commands, restart your device and check if it fixes the problem.

3] Register the Windows Update DLLs again

There is another chance that the 8024A000 error code will occur, which is the DLL. It may not be accurately recorded. By the way, it is mainly reported that this happened in the previous version of Windows. If it is related to your current conditions, you must re-register the DLL update.

To do this, click the Start button and type Notepad.

From the list of best matches, right-click the result and select Run as administrator.

If the UAC appears on the screen, click the Yes button to grant administrative privileges.

Inside the raised notepad, copy and paste the following commands:

regsvr32 c:\windows\system32\vbscript.dll /s
regsvr32 c:\windows\system32\mshtml.dll /s
regsvr32 c:\windows\system32\msjava.dll /s
regsvr32 c:\windows\system32\jscript.dll /s
regsvr32 c:\windows\system32\msxml.dll /s
regsvr32 c:\windows\system32\actxprxy.dll /s
regsvr32 c:\windows\system32\shdocvw.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups2.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 Softpub.dll /s
regsvr32 Mssip32.dll /s
regsvr32 Initpki.dll /s
regsvr32 softpub.dll /s
regsvr32 wintrust.dll /s
regsvr32 initpki.dll /s
regsvr32 dssenh.dll /s
regsvr32 rsaenh.dll /s
regsvr32 gpkcsp.dll /s
regsvr32 sccbase.dll /s
regsvr32 slbcsp.dll /s
regsvr32 cryptdlg.dll /s
regsvr32 Urlmon.dll /s
regsvr32 Shdocvw.dll /s
regsvr32 Msjava.dll /s
regsvr32 Actxprxy.dll /s
regsvr32 Oleaut32.dll /s
regsvr32 Mshtml.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 Browseui.dll /s
regsvr32 shell32.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 jscript.dll /s
regsvr32 atl.dll /s
regsvr32 Mssip32.dll /s

Now click on the File menu and select the Save As option.

On the next screen, choose an appropriate location, then save the file as WindowsUpdate.bat. By the way, you can rename the file as needed, but the file name extension should be a batch file.

Once you have created the batch file, double-click it and when prompted by UAC on the screen, click the Yes button.

After that restart your device and once it starts up, check if the error code 8024A000 still persists. If yes, go to the next effective solution.

Also see: 2 Methods to Find WiFi Password in Windows 10

4] Perform SFC and DISM scans

This critical issue can also sometimes occur due to a certain limit on system file corruption. In this case, it is always a good idea to run SFC and DISM scans so that you can repair corrupt system files.

5] Troubleshoot clean boot status to correct error code 8024A000

Unfortunately, if none of the above solutions have helped you resolve this issue, you may want to consider doing a clean boot on your computer.

Also see: 2 Methods to Find WiFi Password in Windows 10

Clean boot troubleshooting is designed to isolate a performance issue. To perform clean-up boot troubleshooting, you must perform a series of actions, and then restart the computer after each action. You may need to manually disable item after item to try to identify the one causing the problem. Once you have identified the criminal, you may consider removing or deactivating them.

Press the Window + R shortcut key to open the Run dialog box. In the field, type MSConfig and press enter. If the UAC prompts you, simply click the Yes button.

Once in the system settings window, go to the Services tab and check the Hide all Microsoft services box next to it. After that click on Disable All> Apply> OK.

Task Manager

Now go to the Home tab and click on the Open Task Manager link.

In the next window, select each startup item one by one and disable it. Then close the window and restart your computer.

If the problem is solved now, then everything is fine; otherwise, reopen the System Settings window and go to the General tab. Then check the box next to Charging System Services. Now click on the Apply> OK button to save the changes and restart it again.

You may also like

Leave a Comment