Home How To How to Fix Hard Drive not showing up on Boot Menu in Windows 10

How to Fix Hard Drive not showing up on Boot Menu in Windows 10

by Mohsin Raza
Fix Hard Drive not showing up on Boot Menu

If when you turn on your Windows 10 PC and it neglects to boot effectively and you get to the BIOS/UEFI and notice that the circle drive (HDD/SSD) isn’t showing or recorded on the boot menu, then this post is intended to support you. In this post, we will introduce a few solutions you can attempt to assist you with fixing this issue so you can have your PC up and running in no time.

Hard Drive not showing up on Boot Menu

If you’re confronted with the issue of the Hard drive not showing up on the boot menu in Windows 10, you can attempt our suggested solutions underneath in no specific request and check whether that assists with resolving the issue.

How about we investigate the description of the procedure involved in relation to every one of the recorded solutions.

1] Update or reinstall plate drive drivers

A harmed or obsolete device driver might be the cause. For this situation, you can attempt to update/reinstall plate drive drivers and see whether the issue is fixed or not.

If this solution doesn’t fix the issue, you can attempt the following solution.

2] Check the connection and USB port connection

To use a circle drive with your PC, you have to connect two different force strings. One SATA link will be between the motherboard and the plate drive. The second SATA link will be between the hard circle and SMPS or whatever another source, where it can get the force from. If you commit any error, your PC won’t have the option to recognize the plate drive. Likewise, you should connect the SATA link to the correct port on the MOBO.

Along these lines, you may experience this issue if the HDD/SSD information link gets free or the USB port is dead. Here, you can attempt to change another link or change another USB port to check whether it tends to be recognized.

Also see: How To Fix Windows 10 Update Error 0xc1900201

3] Initialize circle drive

At the point when a circle drive isn’t initialized, you cannot spare information on it and BIOS cannot perceive the plate drive which can be the reason for the issue. This issue regularly happens to another plate drive. For this situation, you can attempt to initialize the plate drive and check whether that makes a difference.

4] Turn on USB port in BIOS

You may experience the blunder if your drive isn’t recognized effectively because the USB port is killed in BIOS. Some motherboard makers cripple unused ports in the BIOS as a matter of course. For this situation, you should get to the BIOS setup to verify its present state.

Note: BIOS setup changes from motherboard to motherboard. Survey the documentation that accompanied your PC if you make some difficult memories navigating the BIOS.

Once you’re in the BIOS environment and you see the USB port is killed, do the following to turn it on:

  • Use the arrow key to choose Advanced > Onboard Devices or Integrated Peripherals from the menu and hit Enter.
  • Select the USB Controller.
  • Press + or – to change the setting to Enabled.
  • Next, press F10 to enable the USB ports and leave the BIOS.

You would now be able to restart your PC and check whether it boots effectively as the circle drive will now be recorded on the boot menu.

You may also like

Leave a Comment