Table of Contents
Mostly, every PC user connects his/her device with the internet. So Windows OS is capable of providing tons of beneficial services to online users. But there are times when a user starts to face difficulties like “no network adapter in the device manager on Windows 10”.
This error is mainly caused by new updates. Also, I’ve seen cases where beginners try to customize the installed operating system and end up performing some tweaks accidentally. That’s why I’ll provide you with several methods to Fix Ethernet Adapter Not Showing in Device Manager. So you can easily get rid of this critical situation by implying simple steps.
3 Ways To Fix Ethernet Adapter Not Showing in Device Manager
Enable Through Change Adapter Settings
- Navigate to Control Panel-> Network and Internet-> Network and Sharing Center.
- Click on “Change Adapter Settings” from the left-side panel.
- Now right-click on your desired “Ethernet” connection and select “Enable”
- Check if the problem is solved, if not, move to the next step.
Reinsert CMOS Battery
The CMOS battery is the hardware installed on your PC’s motherboard that stores some necessary information. The info that helps your device to work appropriately, like the passwords, account name, etc. It also contains some information about the hardware connected to your device.
There are cases where reinstalling CMOS battery solves the issue. So to perform this task, you need to shut down your PC and remove the power cable from it. Now uncover it and when you are able to see its motherboard, remove the CMOS battery or cell-like hardware from it. Keep it that for several (2 or 3) minutes and then reinstall it. Now plug your PC and start it.
Reinstall LAN Card
So far, if nothing seems to be of much help, try reinstalling your LAN card. Imply the same method as described above to uncover your PC’s body. Now unplug the LAN Card from it and clean it from the dust. After 1 or 2 minutes, reinstall it and boot your PC.
That’s all, keep visiting WindowsBoy for more.