Matter of fact, you need a router to connect your desktop or laptop with the internet. Even if you are using a WiFi connection, you’ll always be required to have a fully functional router. So when we talk about connecting a device with the internet, there are two possible ways to do that.
The first one is by connecting your machine via broadband cable and the second is by connecting with a WiFi. So if you have Linksys router, then you might be facing trouble every time you try to connect with its WiFi. That’s why I’ve drafted a guide of How To Fix Unable To Locate Linksys Server. In some cases, this error is named “Server is found”. The main cause behind this issue is that your router isn’t allowing you to connect your devices via WiFi.
3 Ways To Fix Unable To Locate Linksys Server
Restart Linksys Router
There are cases when restarting an electronic device has proved to be a solution to very critical problems. It can be the same case if you are facing Unable To Locate Linksys Server error. To check, disconnect your router from the power source and let it be for about 30 seconds. Afterward, reconnect your router with the power source and check if it solves the issue (if you are asked to re-enter your admin and password, enter “admin” as both password & username).
Set up your Router
If rebooting your router doesn’t help you Fix Unable To Locate Linksys Server, then you might need to configure it manually. For that, visit http://192.168.1.1/ from your web browser and enter the right credentials to log in. If you haven’t changed your router’s settings, then your default password would be “admin”.
Once you’ve successfully logged in, enter 184.108.40.206 as Static DNS 1 & 220.127.116.11 as Static DNS 2. Thereafter, click on the “Save” button and close the web browser. Now recheck if this was helped for you.
Update Linksys Firmware
By any chance, if your router’s firmware is not up-to-date, its time you do it. For that, you need to copy 192.168.1.1 and paste it into your web browser’s address bar. Sign-in and navigate to Administration>>Firmware Upgrade. Now if you want to upload a file, then click on the “Browse” button or just hit the “Start upgrade” button and start following the onscreen instructions. And please don’t restart your router while this process is executing.
That’s all, keep visiting WindowsBoy for more.