How to Fix Your PC doesn’t support Miracast – Windows 10 error

A few Windows 10 PC users have been experiencing the Your PC or cell phone doesn’t support Miracast, so it can’t extend remotely error when attempting to connect through a Microsoft Wireless Display Adapter using Miracast. Most influenced users report that this error happens much after they’ve ensured that they meet every one of the prerequisites to run Miracast. In the present post, we will investigate the causes and potential answers to this issue.

You may experience this Miracast issue for the accompanying reasons:

  • Intel Graphics Hardware is disabled.
  • Wi-Fi is Off.
  • One of the devices isn’t Miracast supported.
  • The remote connector is compelled to 5Ghz.

Cisco AnyConnect or comparable programming halting the Miracast connection – The Miracast connection may neglect to build up because an outsider programming with a coordinated VPN include was hailing the Micracast innovation as a “Split Tunnel” security chance.

Also see: Fix Application can’t find Scanner – Error WIA_ERROR_OFFLINE, 0x80210005

Now, how about we dive into the point by point troubleshooting steps.

Before you continue with the troubleshooting steps sketched out above, first verify if your PC is Miracast perfect. There are two primary parts that force a Miracast connection – system and illustrations.

Start by leading a few tests that will uncover if your framework is fit for supporting a Miracast connection – by checking whether you’re arrange connector is good and afterward verify if your illustrations drivers are prepared to help Miracast.

Here’s the ticket:

To test the graphics drivers, run DirectX Diagnostic Tool (dxdiag).

When the DirectX Diagnostic Tool page is opened, click on the Display tab and take a gander at the base of the Drivers section on the correct sheet for the Driver Model. If the driver model doesn’t state WDDM 1.3 or over, your framework isn’t prepared to oblige a Miracast connection.

Dxdiag

You can leave the DxDiag page.

Next, right-click Start, select Windows PowerShell to dispatch the PowerShell window.

Copy and paste the order underneath into the Powershell window, and hit Enter to verify if you have the correct system connector driver variant:

Get-netadapter|select Name, ndisversion

If the returned NdisVersion is above 6.30, your PC is prepared to help Miracast from a system perspective.

You can leave the Powershell window.

Note:

If your NdisVersion is under 6.3, you can open Device Manager and afterward have a go at refreshing your Wireless Network Adapter driver. If that doesn’t work, you can quit following the remainder of the strategies beneath because your device isn’t good with Miracast.

Make sure that Wi-Fi is enabled on the two devices

Miracast uses Wi-Fi Direct, you don’t really need to have both of your devices connected to a similar system, however, you do need to guarantee that Wi-Fi is empowered on all devices.

To ensure that Wi-Fi is enabled on a Windows 10 PC, press Windows key + R to open up a Run exchange box. Copy and glue ms-settings:network-wifi and hit Enter to open the Wi-Fi tab of the Network and web Settings menu.

In the Wi-Fi tab, ensure that the switch button related to Wi-Fi is turned On.

Users will likewise need to check Wi-Fi is empowered on the other device. How precisely users do that differs from device to device, however, users can, as a rule, modify Wi-Fi settings on iOS and Android stages from the Settings menu.

Enable Intel Integrated Graphics and update it to the most recent version

You need a bolstered Intel incorporated illustrations card so as to make a Miracast connection, the issue may happen because the arrangement of the coordinated design is debilitated from your BIOS settings.

To get to your BIOS settings, you’ll have to press the BIOS key during the start of the startup systems. You can likewise do an online pursuit with “profiles key + your motherboard maker”.

When you gain section into your BIOS settings, search for an Advanced (Expert settings, or something comparable) menu and search for a passage named or like Advanced Chipset Settings.

Next, select SouthBridge Configuration and change the Primary Graphics Adapter to IGP > PCI > PCI-E.

Change wireless adapter to Auto

It is known that users may encounter the Your PC doesn’t bolster Miracast error because their remote connector had to 5Ghz or 802.11blg as opposed to being set to Auto.

For this situation, you can rectify the issue effectively by slowing down the Wireless Mode determination to Auto.

Here’s the secret:

  1. Right-click Start, then select Device Manager.
  2. In Device Manager, click the chevron on the Network connectors classification to crumple the area.
  3. Then right-click the remote system connector recorded there and select the Properties choice.
  4. Snap the Advanced tab.
  5. Parchment and select the Wireless Mode property.
  6. Then select Auto on the Value drop-down menu.
  7. Snap OK and hold up until the system connection is reestablished.
  8. Then restart your PC and check if you can use the Miracast include.

Disable any dynamic VPN connection

A few outsider VPN arrangements (counting Cisco AnyConnect) are dismissing WiFi Direct (the basic innovation behind Miracast). Ordinarily, these outsiders will empower WiFi Direct as Split Tunnel security helplessness, constraining the framework to impair the usefulness.

For this situation, the best way to test whether this situation is happening in your specific circumstance is to debilitate Cisco AnyConnect or comparative programming, restart your machine and check whether you can make a Miracast connection.

Uninstall/Reinstall the Wireless Network Adapter driver

Here, uninstalling and afterward reinstalling the remote system connector driver may resolve the Your PC or cell phone doesn’t bolster Miracast error.

Realtek Driver

Also, that is it, parents! Ideally, any of these arrangements will settle the issue for you.

Leave a Comment