PXE-E61 errors are identified with the Preboot eXecution Environment (PXE) upheld by some motherboards. PXE is a unique boot mode that lets the PC scan for and loads a bootable working framework over the system rather than from a nearby hard drive.
It’s not unexpected to see a PXE-E61 error message on a PC that is accidentally attempting to boot to a system device when one doesn’t really exist. This is regularly caused by a misconfigured setting in the BIOS however could be caused by a bombing hard drive.
Here are a few different ways you may see the PXE-E61 and related errors appear:
- PXE-E61: Media test failure, check cable
- PXE-M0F: Exiting Intel PXE ROM.
- PXE-M0F: Exiting Intel Boot Agent.
- No Boot Device Found. Press any key to reboot the machine.
PXE-E61 errors are seen before the PC starts, regularly in white content on a dark foundation, and normally with extra content showed over the error
Instructions to Fix the PXE-E61 Error
Change the boot order:
in BIOS to boot from the hard drive rather than the system. This will constrain BIOS to search for a working framework installed on a nearby hard drive, which is the manner by which most PCs are set up.
Access BIOS and:
ensure it can recognize the hard drive. You may see the PXE-E61 error if the PC attempts to boot to a hard drive that doesn’t work or is disconnected.
Discover the Boot menu and
Ensure the Boot Drive Order screen (or something also named) shows a hard drive and doesn’t peruse “No Boot Drive.” If BIOS doesn’t identify a hard drive, shut down the PC, open the PC case (if you’re on a desktop), and ensure the HDD links are appropriately joined.
If you’re attempting to boot from a USB device like an outside hard drive, ensure the device is really bootable. If it’s not, the BIOS will search for a different device to boot from and might attempt to use the system, along these lines tossing the PXE-E61 error.
You can use a program like Rufus to make a bootable USB device. Perceive How to Burn an ISO File to a USB Drive if you need assistance doing that.
Additionally, twofold watch that the boot request is designed to boot from USB, that the device is completely connected, and that the USB port isn’t to be faulted — have a go at moving the device to a different USB port if you don’t know.
Enter BIOS and disable the PXE
if you would prefer really not to use it. It ought to be called something like Boot to Network or Ethernet, and is generally found in the Boot menu.
If you would like to use the PXE to boot to a system device, watch that the system link is completely connected. If there is definitely not a strong connection, then the PXE won’t have the option to convey over the system and will create the PXE-E61 error.
Replace the Cable with a known decent one if you presume that it’s turned sour.
Update the system card drivers to fix the PXE-E61 error.
An obsolete, missing, or adulterated driver can keep the PC from getting to the system, which thus prevents the PXE from working appropriately.
Clear CMOS to reset the BIOS.
If the PXE-E61 error is because of a misconfigured BIOS setting, resetting BIOS to its default choices will ideally get out the error